Features:
Fits 1/8 Buggy & Truggy
Compact Size (12¼ long x 5¼ wide top deck, 3½" tall, 12¾ total length - 4.2lbs w/no batteries)
95% Assembled - just install chassis retaining tray and adjust holding pins
EZ Access Cover Release - No tools needed to access batteries
Adjustable chassis holding pins and sliding tray for fast and easy setup
Twin 775 - 6300 RPM Motors
Factory installed T-Style connectors
Wiring and battery tray compatible with two 7.2V NiMH stick packs, or two 2S LiPo packs in series (batteries not included)
Handle can hold a glow ignitor, tuning driver, glow plug wrench and spare glow plugs
High quality 16awg Silicone wiring and quick change connectors allow fast repairs with no soldering necessary
Fits batteries 150x46x25.2mm
Specifications: Motor: 750 - 6300 RPM Motors x2 Deck Dimensions: 12¼" long, 5¼" wide Overall Length: 13¾" Overall Height: 3½" Weight: 4.2lbs w/no batteries Battery Holder Dimensions (LxWxH): 150x46x25.2mm (Length Adjustable) Battery Connectors: T-Style
Suggested Batteries:
(2) ECP-5011: EcoPower 6-Cell NiMH 2/3A Stick Battery w/T-Style (1600mAh)
(2) ECP-5110: EcoPower 2S 45C LiPo Battery w/T-Style (5000mAh)
*(1) ECP-4000: EcoPower 4S 20C LiPo Battery w/T-Style (2000mAh)
*(1) PTK-5101-22: ProTek R/C 4S 130C LiPo w/T-Style (4300mAh)
*Battery Note: The SureStart comes equipped with a Y-Harness power lead to accommodate either two 2S LiPo or two 6-Cell NiMH batteries. You can however use a single 4S LiPo battery to power the SureStart, BUT some modification is required - you will need to remove the Y-Harness power lead and re-solder a single T-Style connector to the power leads.
Starter Wheel Note: From the factory, the rubber starter wheel may be slightly too low to effectively contact the flywheel; but there is an easy fix! Simply install washers under the motor/belt bulkhead and the starter wheel lifts up for a longer reach.
